Draytek Vigor 2820 Guide de l'utilisateur télécharger pdf (Page 95)

Vigor2820 Series User’s Guide

General Setup allows you to adjust settings of IP Filter and common options. Here you can

enable or disable the Call Filter or Data Filter. Under some circumstance, your filter set can

be linked to work in a serial manner. So here you assign the Start Filter Set only. Also you

can configure the Log Flag settings, and Accept large incoming fragmented UDP or ICMP

packets.

Click Firewall and click General Setup to open the general setup page.

Call Filter Check Enable to activate the Call Filter function. Assign a start filter

set for the Call Filter.

Data Filter Check Enable to activate the Data Filter function. Assign a start filter

set for the Data Filter.

Action/Profile Select Pass or Block for the packets that do not match with the filter

rules.

IM/P2P Filter Select one of the IM/P2P Filter Profile settings (created in CSM>>

IM/P2P Filter) for applying with this router. Please set at least one

profile for choosing in CSM>> IM/P2P Filter Profile web page

first. For troubleshooting needs, you can specify to record

information for IM/P2P Filter Profile by checking the Log box. It

will be sent to Syslog server. Please refer to section 3.14.5

Syslog/Mail Alert for more detailed information.

URL Content Filter Select one of the URL Content Filter Profile settings (created in

CSM>> URL Content Filter Profile) for applying with this router.

Please set at least one profile for choosing in CSM>> URL Content

Filter Profile web page first. For troubleshooting needs, you can

specify to record information for URL Content Filter by checking

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 304 305

Pas de commentaire

Draytek Vigor 2820 Guide de l'utilisateur Page 95