Draytek Vigor2500 series Guide d'installation

1DRAYTEKVIGOR2500SERIES

10Local networkingTo use the Ethernet port(s) you need at least:One PC with an Ethernet Card installed.TCP/IP protocol suiteFor TCP/IP, your PC can se

11Ethernet port (between router and PC), DSL port and Power port as below:You must wireVigor2500Vigor2500We/Wt

12Install ‘ RouterTools ‘This tool which provides ‘Quick StartWizard’, ‘Firmware Upgrade Program ’and ‘Syslog Monitor’ client is in the attached CD. I

13Once past the password prompt, you will now see the router’s main menu:(Example: Vigor2500)Enter RouterMenuSet DSL ParametersClick on ‘Internet Acce

14For PPPoE/PPPoAUsersEnter your allocated username, password and DSL parameters according to theinformation provided by your ISP.If you want to conne

15Auto detect ATM/DSL SettingYou can also use this function to detect ATM/ DSL setting. Please follow theinstructions to operate. If your country is n

16Wireless LANInterfaceThe Vigor2500We and Vigor2500Wt are equipped with a wireless LAN interfacecompliant with the 11 Mbps IEEE 802.11b protocol. The

17WEP Security ofWireless LANInterfaceSSID(Service Set Identification): You should set the SSID same as your note book wirelesscard to allow the clien

18Access Control ofWireless LANInterfaceFor additional security of wireless access, the Access Control allows your to restrict thenetwork access right

19Trouble Shooting forCan not get on to the InternetCheck if thehardware is OK?Check if the power and LAN line are connected correctly. After power is

2ADSL RoutersAnnex A / Annex BISDN BackupWireless APVigpr2500Vigpr2500WeVigpr2500WtThe Vigor2500 series is an Internet access solution for your LAN wh

20The default gateway IP of router is 192.168.1.1.Please check if you can ping router correctly.For WindowsFor Mac(Terminal)If not, please check the I

21For Win98/ Me user1. Enter “Control Panel” and doubleclick “Network”.2. Choose “TCP/IP of LAN device” and press “Properties”.3. Choose “Obtain an IP

22For Win2000 user1. Enter “Control Panel” and double click“Network and Dial-up Connections”.2. Right click “Local Area Connection” andchoose “Propert

23For XP user1. Enter “Control Panel” and double click“Network Connections”.2. Right click LAN icon and choose“Properties”.3. Choose “TCP/IP” and pres

24For Mac OS9.x userControl Panel —> TCP/IPFor Mac OSX userSystem Preferences —> Network

25Are DSL/ ISPsettings Ok?Connect to router Web Configurator.(Example: Vigor2500)Check if the setting of DSL is ok. (For MPoA users, please refer to t

26—>Encapsulation mode: VCMUX or LLC/SNAPFor PPPoE/PPPoA user, please check if user name/ password provided byISP are correct or not.

27For MPoA (RFC1483/2684) mode users, please check if the WAN IP/ Gate-way/ Namemask is set or ISP requires you to use DHCP client to get WAN IP.Check

3Vigor2500LED Indicators DescriptionsACT(Activity)ADSLBlink when power is supplied to the router and the router is running normally.LINEDATAON when th

4Vigor2500WeLED Indicators DescriptionsACT(Activity)ADSLBlink when power is supplied to the router and the router is running normally.LINEDATAON when

5Vigor2500WtLED Indicators DescriptionsACT(Activity)ADSLBlink when power is supplied to the router and the router is running normally.LINEDATAON when

6CopyrightDeclarationsCopyright 2003 All rights reserved. This publication contains information that isprotected by copyright. No part may be

7affect the usability of the product will not be covered by the warranty.We reservethe right to revise the manual and online documentation and to make

8Series Quick Start GuideIdentify your variantDelivery checkAim of thischapter Quickly connect your router to the InternetCheck your router package fo

9What youneed from ISPDSL ParametersIt should provide at least the following information from ISP :1. The VPI/VCI of the virtual channel to use on the