Draytek VigorAP 710 Guide de l'utilisateur télécharger pdf (Page 78)

VigorAP 710 User’s Guide

The access point can act as a wireless repeater; it can be Station and AP at the same time. It

can use Station function to connect to a Root AP and use AP function to serve all wireless

stations within its coverage.

Note: While using Universal Repeater mode, the access point will demodulate the

received signal. Please check if this signal is noise for the operating network, then have

the signal modulated and amplified again. The output power of this mode is the same as

that of WDS and normal AP mode.

Available settings are explained as follows:

Item Description

SSID

Set the name of access point that VigorAP 710 wants to

connect to.

MAC Address

(Optional)

Type the MAC address of access point that VigorAP 710 wants

to connect to.

Channel

Means the channel of frequency of the wireless LAN. The

default channel is 11. You may switch channel if the selected

channel is under serious interference. If you have no idea of

choosing the frequency, please select AutoSelect to let system

determine for you.

Security Mode

There are several modes provided for you to choose. Each

mode will bring up different parameters (e.g., WEP keys, Pass

Phrase) for you to configure.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 101 102

Pas de commentaire

Draytek VigorAP 710 Guide de l'utilisateur Page 78