Draytek Vigor2910 Series Manuel d'utilisateur télécharger pdf (Page 11)

3.2 TheGreenBow IPSec VPN Client Configuration

3.2.1 VPN Client Phase 1(IKE) Configuration

a. In the "Interface" field, you can select a star ("*"), if the VPN Client host receives a dynamic

IP Address from an ISP for example.

b. "Remote Gateway" field value is the Vigor 2910 router public IP address or DNS address.

c. "Preshared Key" field value must be identical with the pre-shared key set in Vigor 2910

router.

d. In the "IKE" field, Vigor router supports the following parameters.

Encryption: DES/3DES

Authentication: MD5/SHA

Key Group: DH768/DH1024

Phase 1 configuration

e. Click the Advance button. In the pop-up window please enable Aggressive Mode. Then you

must setup the Local ID field. The Value must be identical with the one set in Vigor 2910

router(step d). Vigor only support DNS and Email types.

Note: If you setup the Local ID field in Vigor 2910 router, the Remote ID field in TheGreenBow

must be configured also.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Draytek Vigor2910 Series Manuel d'utilisateur Page 11