Draytek Vigor2910 Series Guide de l'utilisateur télécharger pdf (Page 11)

Vigor2910 Series User’s Guide

For use the router properly, it is necessary for you to change the password of web

configuration for security and adjust primary basic settings.

This chapter explains how to setup a password for an administrator and how to adjust basic

settings for accessing Internet successfully. Be aware that only the administrator can change

the router configuration.

To change the password for this device, you have to access into the web browse with default

password first.

1. Make sure your computer connects to the router correctly.

Notice: You may either simply set up your computer to get IP dynamically

from the router or set up the IP address of the computer to be the same

subnet as the default IP address of Vigor router 192.168.1.1. For the

detailed information, please refer to the later section - Trouble Shooting of

this guide.

2. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will

open to ask for username and password. Please type default values (both username and

password are Null) on the window for the first time accessing and click OK for next

screen.

3. Now, the Main Screen will pop up. Notice that the main screen differs according to the

model of the router that you have. Below is an example.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 198 199

Pas de commentaire

Draytek Vigor2910 Series Guide de l'utilisateur Page 11