Draytek Vigor2910 Series Guide de l'utilisateur télécharger pdf (Page 32)

Vigor2910 Series User’s Guide

Packet Trigger -The backup line is not on until a packet from a

local host triggers the router to establish a connection.

Always On - If the broadband connection is no longer available,

the backup line will be activated automatically and always on until

the broadband connection is restored. We recommend you to

enable this feature if you host a web server for your customers’

access.

PPP Setup PPP Authentication - Select PAP only or PAP or CHAP for PPP.

Idle Timeout - Set the timeout for breaking down the Internet after

passing through the time without any action. This setting is active

only when the Active on demand option for Active Mode is

selected in WAN>> General Setup page.

IP Address

Assignment

Method(IPCP)

Fixed IP - Usually ISP dynamically assigns IP address to you each

time you connect to it and request. In some case, your ISP provides

service to always assign you the same IP address whenever you

request. In this case, you can fill in this IP address in the Fixed IP

field. Please contact your ISP before you want to use this function.

Click Yes to use this function and type in a fixed IP address in the

box.

Fixed IP Address -Type a fixed IP address.

WAN IP Alias - If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use WAN

IP Alias. You can set up to 8 public IP addresses other than the

current one you are using. Notice that this setting is available for

WAN1 only.

Default MAC Address – Click this radio button to use default

MAC address for the router.

Specify a MAC Address - Some Cable service providers specify a

specific MAC address for access authentication. In such cases you

need to click the Specify a MAC Address and enter the MAC

address in the MAC Address field.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 198 199

Pas de commentaire

Draytek Vigor2910 Series Guide de l'utilisateur Page 32