Draytek Vigor 2200V Guide d'installation télécharger pdf (Page 26)

2-5

Installation & Setup

Ethernet hub or switch should be ON.

Note:

If the Ethernet cable is not long enough to reach the

external hub/switch, purchase a longer straight-through

10Base-T Ethernet cable.

2.2.3 Connecting to an ISDN BRI Line (Vigor2200 and Vigor2200X

only)

A. S/T-Interface Model

1. Locate the ISDN cable (black color cable).

2. Plug one of the RJ-45 connectors on the cable into the ISDN

port on the rear panel of the router.

3. Plug the other end of the cable into any of the NT-1 (or NT1

plus) S/T-interface ports.

B. U-Interface Model

1. Locate the ISDN cable (black color cable).

2. Plug one of the RJ-45 connectors on the cable into the ISDN

port on the rear panel of the router.

3. Plug the other end of the cable into the ISDN wall outlet.

2.2.4 Connecting to a DSL/Cable Modem

The router supports connection of a DSL modem via an Ethernet inter-

face only. Non-Ethernet interface DSL modems, such as USB, ATMF-

25 are not supported.

1. Locate your Ethernet cable (should be provided by your ISP

or telcom).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 139 140

Pas de commentaire

Draytek Vigor 2200V Guide d'installation Page 26