Draytek Vigor 2200V Guide d'installation télécharger pdf (Page 88)

5-5

Advanced Setup

These parameters are activated when you set the Link Type to Dialup

BOD. Usually the ISDN will use one B channel to access the Internet

or remote network when you use the Dialup BOD link type. The router

will use the parameters here to make a decision on when to activate/

drop the additional B channel. Note that cps (characters-per-second)

measures the total link utilization.

High Water Mark and High Water Time: These parameters

specify the conditions under which the second channel will be

activated. When the utilization of the first connected channel

goes over the High Water Mark and past the High Water Time,

the additional channel will be activated. The link speed will

then be 128kbps (two B channels).

Low Water Mark and Low Water Time: These parameters

specify the conditions under which the second channel will be

dropped. When the two B channel’s utilization is under the

Low Water Mark and past the High Water Time, the additional

channel will be dropped. The link speed will be 64kbps (one B

channel).

Note:

If you are not familiar with ISDN and ML-PPP’s opera-

tion, be wary of changing the default values.

Click “OK”.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 139 140

Pas de commentaire

Draytek Vigor 2200V Guide d'installation Page 88